s18 1 merged - Flipbook - Page 162
160
CODING EXPLAINED
With a massive number of possibilities to choose from, our extensive range of LED-CELL strips cater to every
application. The step-by-step guide below simplifies the selection process, helping you find the right strip for
your needs. For specific details such as available wattages, sizes, IP ratings, and colour options, refer to the
product-specific pages that follow
CODE PART 1: STRIP MODEL/RANGE
Start by choosing the range based on your needs (e.g., COB C-CELL, ECO
MODEL
C
COB
E-CELL, DIM-TO-WARM D-CELL). The code begins with the letter of the range,
followed by /. For example C/
CODE PART 2: VOLTAGE
Most strips operate at 24V, except U-CELL (48V). Add the voltage to the code.
VOLTAGE
24
24V
For example C/24
CODE PART 3: POWER/OUTPUT
POWER / OUTPUT
Determine the wattage per meter for your strip. The number in the code
03
10W/m
corresponds to this wattage (e.g., 03 = 10W/m). For example C/24/03
CODE PART 4: IP RATING
Choose the appropriate IP rating for your environment (e.g., 20 = IP20).
IP RATING
20
IP20
For example C/24/03/20
CODE PART 5: COLOUR
COLOUR
Specify the strip colour (e.g., 01 = White, 02 = RGB). For example C/24/03/20/01
01
CODE PART 6: COLOUR TEMPERATURE
COLOUR TEMP
Select the correlated colour temperature (CCT) as a two-digit code
22
White
2200K
(e.g., 22 = 2200K). For example C/24/03/20/01/22
CODE PART 7: LENGTH OF STRIP
Choose the length based on your requirements (e.g., S01 = 5m, S02 = 10m).
For example C/24/03/20/01/22/S01
LENGTH (M)
S01
5m
S02
10m
S05
50m
